We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Mikrotik netFiber 9 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) White
SKU
CRS310-1G-5S-4S+OUT
Special Price
£243.22
Regular Price
£442.20
In stock
ARM 32bit, 98DX226S, 256MB RAM, 5x SFP, 4x SFP+, 1x RJ45, RouterOS, IP54
Category: Network Switches
A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.
netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.
There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.
The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.
netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!
netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.
There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.
The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.
netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!
Mikrotik netFiber 9 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) White Specifications
Power | |
---|---|
Power connector | DC-in jack |
Power consumption (max) | 16.3 W |
DC input voltage | 18 - 57 V |
Power source | DC |
Technical details | |
Product colour | White |
Processor frequency | 800 MHz |
Mean time between failures (MTBF) | 200000 h |
Built-in processor | Yes |
Compliance certificates | CE, RoHS |
Ports & interfaces | |
SFP module slots quantity | 5 |
SFP+ module slots quantity | 4 |
Basic switching RJ-45 Ethernet ports quantity | 1 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Power connector | DC-in jack |
Network | |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Memory | |
Memory type | DDR3-SDRAM |
Internal memory | 256 MB |
Flash memory | 16 MB |
Design | |
---|---|
International Protection (IP) code | IP54 |
Product colour | White |
Performance | |
Processor frequency | 800 MHz |
Memory type | DDR3-SDRAM |
Mean time between failures (MTBF) | 200000 h |
Internal memory | 256 MB |
Flash memory | 16 MB |
Built-in processor | Yes |
Processor model | 98DX226S |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | Yes |
Operational conditions | |
Operating temperature (T-T) | -40 - 70 °C |
Weight & dimensions | |
Width | 304 mm |
Depth | 212 mm |
Height | 71 mm |
Other features | |
Ethernet LAN data rates | 10,100,1000 Mbit/s |